안녕하세요 랩케빈의 케빈입니다! ^^
오늘 소개해드릴 작업은 기아 레이 캡스클린케어 광고랩핑 입니다.
시공은 3M 그래픽 필름으로 하였습니다.
보통 광고랩핑 보다는 랩핑할 부위가 꽤 많았습니다.
일단 시공 부위와 필름을 확인하면서 시작하였습니다.
Hello everyone, this is Kevin from WRAP KEVIN!
Today's job is Kia Ray advertising wrap.
Today, we are using 3M Graphic Film.
Typical vehicle advertising wrap is simple,
but there were a lot of areas to cover on this one.
I started off by checking the film and parts needed to be wrapped.
🔘시공차량 / Vehicle Details🔘
기아 레이
Kia Ray
🔘시공내용 / Work Details🔘
광고랩핑
Advertising Wrap
🔘시공필름 / Color Details🔘
3M 그래픽 필름
3M Graphic Film
🅦🅡🅐🅟 🅚🅔🅥🅘🅝
뒷유리 데칼을 붙인 뒤 스포일러를 먼저 랩핑하였습니다.
광고필름은 랩핑필름 처럼 쉽게 늘어나지 않고
스포일러처럼 심한 아로는 잡기 어렵습니다.
First we start off with the rear windshield and the spoiler.
The advertising wrap film does not stretch well
so something like spoiler is not an easy thing to wrap.
다음은 측면을 붙입니다.
측면은 통 시공이며 글씨도 맞춰야 해서 쉽지 않습니다.
필름이 딱 맞춰서 오는 거라 여유분이 없으며 엄청 신중하게 작업합니다. ^^
Next we do the sides.
Sides are being done in one single piece
so lining it up is not an easy process.
There are no extra film so the job needs to be done very carefully.
루프도 큰 면이지만 모양이 어렵지 않아 쉽게 진행하였습니다.
루프 쪽 골을 제대로 누르지 않으면 공기가 찰 수 있으며 나중에 뜰 수도 있습니다.
Roof is a big section, but it was easy since the surface is pretty flat.
If not properly done, there may be remaining air or it may lift later on
so it had to be done perfectly.
드디어 완료가 되었습니다!!!
시공할 부위가 많아 시간이 좀 걸렸지만
고객님이 만족하셔서 너무 뿌듯합니다. ^^
완성된 작품을 구경해보시죠~
Finally the job is done!!!
There were quite a lot of areas to cover so it took sometime,
but customer was very satisfied in the end.
Let's take a look at the finished project~
곰돌이가 참 귀엽게 생겼네요. ㅎㅎㅎ
이번 포스팅도 끝까지 읽어주셔서 감사드립니다.
랩케빈의 케빈이였습니다.
궁금한게 있으시면 언제든지 문의해 주세요.
친절히 도와드리겠습니다! ^^
Teddy bear looks so cute. :)
Thank you taking the time to read this post until the end.
I am Kevin from WRAP KEVIN.
If you have any questions at all, feel free to contact me anytime.
I will kindly assist you in anyway possible! ^^
랩케빈 (한국어/영어 문의)
전화/문자:
카톡: wrap_kevin
톡톡, 인스타DM
자동차 꾸미기 1등 앱